SigP228 hammer bug

[Dangerzone]

On the sig p228, if you remove the hammer before you remove the slide, the hammer will snap back to the gun when you remove the slide.

[Stronger]

Can you post screen ..It is impossible to remove the hammer before remove the slide!

[Dangerzone]

You would think... but, you can remove the grips, the mainspring, then the hammer pin, the hammer itself, and quite a bit more without pulling the slide first

but once you remove the slide, the mainspring/hammer snap back into position and cant be removed again without restarting!

here is a before and after

[Stronger]

Thank you...I fixed it